Inspection and due-list tracking
Hours, days, months and any cycle counter, including landings, starts, torque, N1 and N2 cycles. Every item is flagged at whichever limit comes first, with warnings you set.
Built by an operator. Designed for operators.
HangarMX keeps your inspections, life-limited parts, ADs, flights and logbooks in one place, with electronic signatures that follow FAA AC 120-78B. It works out what comes due next by hours, cycles or calendar, whichever comes first.
Works on any phone, tablet or computer. Nothing to install.
Your fleet at a glance
Open an aircraft and see its counters and every tracked item, with the most urgent at the top. Overdue, due soon or OK, measured against hours, cycles and the calendar at once.
Features
Replace the spreadsheet, the binder and the whiteboard. HangarMX covers the whole maintenance record, from the flight that adds the hours to the signature that closes the work.
Hours, days, months and any cycle counter, including landings, starts, torque, N1 and N2 cycles. Every item is flagged at whichever limit comes first, with warnings you set.
Part and serial numbers, time since new and overhaul, retirement or overhaul limits and assemblies. Replace a part in a few taps and keep its full history.
New FAA airworthiness directives are matched to each aircraft's make, model, engines and serial number, ready for you to review, track and comply.
Sign off an item and the 43.9 entry writes itself, with name, certificate type and number. Electronic signatures follow AC 120-78B and due dates reset automatically.
Pilots log flights from their phone and the aircraft's times and cycles update. You can import from FlySto, or snap a photo of the log sheet to draft entries.
Keep 8130-3s, 337s, STCs, work orders and photos with the aircraft or the log entry they belong to. Export to CSV or a printable status report anytime.
Charts from the aircraft's own flight manual, worked out for today's conditions. Inputs outside the chart are reported, not guessed.
Give aircraft owners a read-only view of their own aircraft: what's due, recent work and open write-ups. Nothing else is visible to them.
Utilization, flight hours and activity across the fleet and by person, so you can plan downtime before it plans itself.
Helicopters and airplanes
Whether you fly a pressurized piston single like this Piper M350 or a fleet of turbine helicopters, HangarMX tracks the counters your aircraft actually has, and nothing it doesn't.
FAA compliance
HangarMX is designed so the records it keeps are the records the regulations ask for, and its electronic signatures follow the FAA's guidance in Advisory Circular 120-78B, Electronic Signatures, Electronic Recordkeeping, and Electronic Manuals.
Every log entry records a description of the work, the date, aircraft time and counts, and the name, certificate type and certificate number of the person approving it. Signing off a tracked item writes the entry for you.
Quick-add annual and 100-hour inspections, with the 100-hour overfly tolerance shown as "in tolerance" rather than overdue. The next interval counts from the original due point, as 91.409(b) requires.
The AD feed matches new directives to your aircraft. ELT inspection and battery, pitot-static and altimeter, transponder and VOR checks are ready to add, each with its regulation noted.
The advisory circular lists the elements an acceptable electronic signature needs. Here's how HangarMX meets each one.
HangarMX prints your company's electronic signature process document: responsible person, authorized signers, hardware and software, auditing, changes and training, with the AC paragraph for each section. Keep it with your records or give it to your FAA office.
An activity log shows who changed what and when, deleted items can be restored, and each person's signed records are listed with whether their seal is intact.
Good to know: the FAA doesn't certify or approve recordkeeping software. Under Part 91 (other than 91K), no FAA approval is needed to use electronic signatures and records, though AC 120-78B ¶1.9.5 recommends following it. Operators under Parts 91K, 121, 125, 133, 135, 141, 142, 145 and 147 need FAA acceptance or authorization (OpSpec A025) first, and HangarMX's procedures document is built to support that.
Switching is the easy part
You don't need to retype a runsheet. HangarMX reads the records you already have and checks every due point against them before anything is saved.
Your team signs in at yourcompany.hangarmx.com, with its own users and data.
Upload a runsheet or report. Any line where the source disagrees with itself is flagged for you.
Pilots log flights, mechanics sign off work, and everyone sees the same due list.
Airworthiness directives
HangarMX reads new FAA directives from the Federal Register as they're published and sorts each one for every aircraft: applicable, needs review, not applicable with the reason, or complied. One tap turns an AD into a tracked item.
Your records are safe
Maintenance records have to outlive the people who wrote them, and 91.417 says some must transfer with the aircraft when it's sold. HangarMX is built around that.
An activity log shows who changed what and when. Edited log entries keep their history.
Anything deleted goes to Recently deleted first, so you can restore it.
Daily database backups, point-in-time restore and a nightly off-site copy in another region.
Each company is walled off from every other one. Sign in with a password or a passkey.
Questions
The FAA doesn't certify or approve maintenance tracking software. What it regulates is your records and how you sign them. HangarMX is built around the record rules in 14 CFR 43.9 and 91.417, and its electronic signatures follow Advisory Circular 120-78B. Under Part 91 (other than 91K), no FAA approval is needed to use electronic signatures and records, though the FAA recommends following the AC.
Yes. The FAA accepts electronic signatures on maintenance records when they meet the elements in AC 120-78B: unique to the signer, under their sole control, a deliberate act, applied only to what the signer reviewed, and unalterable once signed. HangarMX meets each element and prints a procedures document that shows how.
Yes. Operators under Parts 91K, 121, 125, 133, 135, 141, 142, 145 or 147 need FAA acceptance or authorization (for example OpSpec A025) before relying on electronic signatures. HangarMX generates your electronic signature procedures document, with the AC paragraph for each section, to support that submission to your Flight Standards office.
Yes. HangarMX tracks torque cycles, engine starts, N1 and N2 cycles and creep, alongside airframe hours and landings. It works just as well for piston airplanes, where you only need hours, landings and the calendar.
New FAA ADs are read from the Federal Register as they're published and matched to each aircraft's make, model, engines and serial number. Each AD is marked applicable, needs review, not applicable with the reason, or complied, and can be turned into a recurring tracked item in one tap.
Yes. You can import an Excel runsheet, a ModernHawk aircraft report or a Traxxall status report, or start from a manufacturer template. Every import is previewed and checked against the source's own due points first.
No. HangarMX runs in the browser on any phone, tablet or computer. Pilots can log flights from the ramp and mechanics can sign off from the hangar floor.
Anytime. Fleet status, tracked items and logbooks export to CSV, and each aircraft has a printable status report you can save as a PDF.
Built by an operator.
Designed for operators.
HangarMX was built inside a working flight operation, by people who track the same inspections, chase the same ADs and sign the same logbooks you do. So every screen answers the questions an operator actually asks.
Get started
Every plan is customized to fit your operation. Tell us about your fleet and our integrations team will set up a walkthrough and a quote. Already a customer? Sign in to your company.
Tell us a little about your operation and our integrations team will be in touch.
Enter your company's HangarMX address.
Not sure of your address? Ask your administrator, or contact us.